top of page

"Huckleberry Finn" - Gruppe für Lehrer

Öffentlich·7 Mitglieder
Jackson Cook
Jackson Cook

How To Hack Wifi Using Windows €? No Usb Adapter Required… [VERIFIED]

Beyond the two primary tools listed above, the next most important requirement is good wireless adapter. To really be effective at wireless hacking, your wireless adapter should have two primary features.

How to Hack wifi using windows – No usb adapter required…


A wireless adapter that can't do these two critical features doesn't mean that you won't be able to crack wireless, but it will mean that it will be so slow that it renders it effectively impossible. Wireless hacking in a world of WPA2 encryption can be a relatively slow process with the best equipment.

In the wireless world, the equivalent is monitor mode. This enables us to see and manipulate all wireless traffic passing through the air around us. Without this ability, you are limited to using your wireless adapter to only connect to wireless APs that accept you and authenticate you. That is not what we are willing to settle for.

Since most built-in wireless adapters in your laptop are probably inadequate to crack wireless, you are better off purchasing a USB wireless adapter for wireless hacking. For long-range, our community recommends the Alfa AWUS036NHA Wireless B/G/N USB Adaptor. For a more discreet form factor, the Panda Wireless N USB Adapter is the most popular adapter among our newer hackers.

If you choose to install Kali as a dual boot system, you can use your built-in wireless adapter for wireless hacking, if its on the Aircrack-ng compatibility list. Although you can hack with wireless cards not on that list, you had better be very patient as this process make take you days or weeks without the proper adapter.

To effectively hack Wi-Fi passwords, you will need a proper wireless adapter. Make certain that you check the Aircrack-ng compatibility list to make certain that your wireless adapter has the necessary features to make your Wi-Fi hacking fast and effective.

If you're looking for a low-cost way to jump into Wi-Fi hacking, consider grabbing a $35 Raspberry Pi with your adapter to build a Kali-based hacking computer on a budget. You can check out our guide here on setting it up.

I really need your help. I bought the AWUSO36NH usb wireless adapter, but it doesn't seem to work with kali in my virtualbox. I downloaded the driver (the RT2870 for windows) and the virtualbox extension pack, and i updated and upgraded everything with apt-get.

I am a noob, for sure. This will become evident in my future posts, and there will be many future posts made by myself because I'm very interested / captivated by the whole area of hacking. I am determined to get to grips with using Kali and knowing how to hack wifi etc. I have to offer my thanks at this point to the authors of this site. You have sparked an interest in me which seems to have extremely quickly become a passion!

Okay, so I am slightly confused in this topic as well, but the biggest reason for my confusion is to the reason why nobody as popped the question to you (OTW) as to what network adapter you use as an elite hacker (professional?). So, the question is as follows. OTW, what network adapter(s) do you use? Also, Internal? External? Both? (Not trying to pry, haha, I just would like to know what an elite uses)

I was actually looking for some AC version of the Alfa adapter, but since it's using a (currently) esoteric chipset (RTL8812AU) I guess it's not worth it. Also found hints claiming problems with kali/aircrack in the (kali forums.

I have TP-Link wn722n wireless adapter. I changed its mode to monitor through airmon-ng. I am using kali linux to hack wifi, I have tried all tools in kali linux for hacking wifi, but it is not capturing the WPA handshake... Help me please to solve this problem

Can anybody tell me if i can use this USB Long Distance Range WiFi Antenna Booster Wireless with kali linux and if it is any good to use to hack wifi my own of course, But just want to learn so if anybody can take a look at the link on ebay of the device or if anybody knows any i can get for long distance for around 15 to 20. Thanks all

1.- it is really feasible to use a 16-26-32 dBi ubiquiti nano station to get a far away wifi signal, hack it and use it as your ip to launch an attack ?(just like Mr. Robot did with a pringles cantenna)

How long does this process normally take? Because for me it will just only jam and not actually force the user to the proxy webserver. What I believe is happening is users get kicked out of network (deauth is working). But then the fake AP isn't setup properly because it wont connect to the fake AP instead my computer is trying to connect the the real AP but gets instantly kicked out of it and this will just loop (Yes I am using two wifi adapters, AWUS036NHA and the TL-WN722N).

Hey. I read few of ur hacking tips of wifi. But I am more intrested in wifiphiser , I have few douths on it. When we send that authentication to the user , can he suspect and see our mac address. Is it safe to use this method. Does this method work on all type of wifi protected routers. And why do we need 2 adapters . Can we do this method with one adapter. Pls if there is a video for this , then can u send the address. Thanku and waiting for ur reply.

Hey guys. When i install the wifipshisher file i get this error :No wireless interfaces found, bring one up and try againI was told that if i.m using Virtual Box i can.t connect to my wifi driver, so that means i can.t use this method?

How many AP's are shown to the user with the same SSID ? I'm assuming it is two, as there are in effect two separate networks, albeit with the same SSID name, ( the real one and our twin ).Wifiphisher relies on us having the stronger signal and their adapter choosing the strongest one. But isn't there a problem ? Each network shown has the option to connect automatically ( enter the network password once, and the wifi adapter always chooses this network ). So how does our twin AP get selected in this situation ?

Any one help meWhen I'm trying to start wifi phisher ,It showing that "failed to find interface with AP mode "But I have an external wifi adapter which is capable of monitor mode and packet injection and also it supports AP mode

To connect a wireless adapter to your Kali Linux virtual machine, when using VMware Player, you can go to the VMware Player menu > Player > Removable Devices > [your_adapter] > Connect (Disconnect from host).

I believe up to this point, you have a working wireless adapter on your Kali Linux VirtualBox machine. Please remember when selecting an adapter for wireless hacking to ensure the chipset used is among the chipsets listed above.

Originally I was using Fern in Kali and ran into some issues with my wireless adapter and with the program freezing or not opening after updating it. I have the fixes I discovered in another blog post for anyone else that may have these same problems.

Is it possible that they ARE using the Intel AX210 chipset, but then doing a PCI-E to USB conversion via another intermediary chip. PCI-E and USB uses different protocols, so a conversion is necessary. Similar to SATA to USB adapters, which convert the SATA signaling to USB protocol.

An additional adapter or set of adapters may be needed depending on the car model/production year and the OBD interface used. At the selection screen AlfaOBD displays the type of the adapter to plug into the car OBD socket and the OBD interface to connect to the selected control module. Also the app displays the "Connect adapter..." message before connecting to the control module. No "blue" adapter needed when using OBDLink MX+/EX, ELS27, Vgate FD/FD+/MC/MC+ interfaces, you can ignore the "Connect blue adapter" message.

The best WiFi adapter for Kali Linux as has been said most of the time, there is no "Best WiFi adapter" when working quietly, a small WiFi adapter is required; when working in the "concrete jungle," the most powerful and sensitive gadget with huge antennas is required. Several of us live in areas where 5.0GHz ac Access points are plentiful, but in several places, there are simply no Access Points on 5.0GHz. Anyone can easily afford to spend 50 bucks, while another one is on the lookout for inexpensive adapters on the secondary market.

Even if we install Kali Linux as our primary machine, then we will get access to our built-in wireless card, but we will not be able to use it for hacking because it does not support monitor mode or packet injection. So if we need to use it for WiFi auditing and other interesting Kali Linux stuff like aircrack-ng and other tools, we will need to acquire a Kali Linux USB WiFi adapter.

Alfa AWUS036NH is a plug-and-play router that works with any brand 802.11g or 802.11n router using 2.4 GHz wavelength and supports multi-stream and MIMO (multiple input multiple outputs) with a TX data rate of up to 150 MBPS. It also has a clip that we can use to attach this adapter to a laptop id.

hey alex! i found your article very helpful for begginers like me. i've installed airgeddon successfuly. Thanks to you! and i was wondering if i could use airgeddon without wifi adapter to hack wifi. is it possible? btw im using lubuntu.

I have installed Kali Linux 2019.3 version in VirtualBox. I have installed all the packages needed for airgeddon. I am using TL-WN725N wifi adapter in the host PC. But the guest OS (Kali Linux) is not showing WiFi it is connecting as wired connection. I have checked the internet for solution, and it asked me to install rtl8818eu git hub package and I am getting error while installing it. Pls help.

So thats pretty much it when it comes to hacking WiFi using Wifite. There are other ways of doing this, such as using the aircrack-ng suite of tools and/or using dedicated WPS hacking tools such as reaver. Additionally, this guide is only but a small slice of the world of wireless hacking, so be sure to stay tuned for more wireless hacking tutorials soon!


Willkommen in der Gruppe zu unserer Aufführung "Huckleberry ...



Die Schule der magischen Tiere

Theaterstück für eine Schulklasse nach dem Buch von Margit Auer

Im Kinderhaus der Brunsviga in Braunschweig haben wir im Herbst 2022 das Theaterstück "Die Schule der magischen Tiere" mit Kindern aufgeführt, und eine tolle Aufführung mit fast 300 Besuchern zum Abschluss des Aufführungsworkshops erleben dürfen. Wir bemühen uns weiter darum, hier mehr Fotos aus der Aufführung zeigen zu dürfen, und bereiten zumindest einen weiteren Aufführungsworkshop mit diesem Stück vor. Interessierte Schulen oder andere Einrichtungen für Kinder können sich einfach direkt an uns wenden!

bottom of page